Factory Price For Hydraulic Oil Suction Filter - Magnetic Return Filter Series – Xinyuan

The WY & GP Series return filters are installed on the top of the tank. There are magnets in the filter. So meg net ic contaminants can be removed from oil. The element is made of fine fibre media with high efficiency, lower pressure drop and long life. Differencial Pressure indicator will signal when the pressure drop across the element r- eaches 0.35MPa and by-pass valve will automatically open at 0.4MPa. Element is easy to be replaced from filter.

WY、GP:Magnetic return filter
BH:Water-glycol
Omit if use Hydraulic oil
Pressure class: 1.6MPa
Y:W DC24V With CYB-I indicator
C:W 220V With CY-II indicator
Omit if without indicator
Fibre filter media (u m) Filtration accuracy
(L/min) Flow rate

LXZS WITH CHECKVALVE MAGNETIC RETURN FILTER

1. PERFORMANCE USAGE:
the filter can be directly installed in the oil, top of the tank, side or bottom, because the filter is equipped with self-sealing valve, when changing, cleaning or maintaining the system, once the dropper cover is unscrewed, the self-sealing valve will automatically close to isolate the oil path, so that the oil in the tank does not flow out, so that cleaning, changing the filter element or maintenance system becomes very convenient.

2.TECHNICAL DATA
a: Pressure class: 1.6(MPa)
b: Initial A P： 0.02(MPa)
c: Flow rate： 160; 400(L/min)
d: Filtration accuracy： 10； 20( p m)
e: Magnetic field strength: N 0.4⑴
f: By-pass valve setting: 0.4(MPa)
g: Indicator： 0.35(MPa)
h: Indicator powe「： 50W; DC24(V) o「AC220(V)
3. MOUNHNG AND MODEL CODE